May 12th CSX Multiplayer

[kinnamon]

I will try to make my setup work for a CSX M&M multiplayer session on Wednesday, May 12 at 9:30 p.m. EDT. Details to follow.

IP 68.209.123.158:8767

Lee

[Darkviper01]

Count me in, I'll take a loaded coal train, need a cal1sign though, don't know what coal trains run on the M&M

Paint Shop, Yonder Locomotive Works.
http://forums.flightsim.com/dcforum/User_files/403071b337c72e30.jpg
Check Out the WVK&O Homepage. http://www.angelfire.com/fang/dark_viper/page6.html
I'm Just down the road from NS/CSX Buckeye Yard.

[kinnamon]

Check out www.bullsheet.com for trains running on the M&M. LK

[Darkviper01]

I'll take U-239 Blue Creek-7, Al to Mobile, Al by way of Montgomery. If you would like to start me somewhere south of Montgomery that would be fine with me, as I would like to make it to Mobile.

Paint Shop, Yonder Locomotive Works.
http://forums.flightsim.com/dcforum/User_files/403071b337c72e30.jpg
Check Out the WVK&O Homepage. http://www.angelfire.com/fang/dark_viper/page6.html
I'm Just down the road from NS/CSX Buckeye Yard.

[NS5237]

I will join, still pondering what train to run....

[sou2601]

I'll make a run. I'll also have to figure out a train to run later.

Jonathan

[ssw]

I'll take Q144 from Brookley-Montgomery

[sou2601]

Ok, I'll take the Q145 Mont to Moblie.

Jonathan

[jdtrainman]

Mark up for Amtrak #1....

Will be a few minutes late due to church obligations...should be online about 8:45 Central....

JBD

[NS5237]

G570-12 (Mobile - S Anderson Ind LD Grain) If thats ok Lee.....

[SD70AC]

I will take the U238. Empty coal train. Recrewing it at Flomaton and heading to Montgomery Yard.

Leader: UP 8138
Call Sign: U238
Starting Time: 9:30
Cars: 80 Empty Coal Hoppers
Length: 4,356
Tons: 8,917

Start: Flomaton
End: Montgomery Yard

[kinnamon]

CSX M&M Sub
Impromptu Multiplayer Session

Wednesday, May 12th
66.35.75.19:8798 (Use whole address.)
Login 9:30 p.m. EDT
Start running 9:45 p.m. EDT
28 spots available


The IP has changed to 66.35.75.19:8798 for tonight's multiplayer session on the M&M Subdivision. It is important to use the entire address. The last four digits are different from the usual string.

Download the client at www.teamspeak.org. Simply login on the teamspeak client under "quick connect", using the address above. Be sure to set mic on "push to talk". Go into the "settings" menu and select "sound input/output" to find this preference setting.

Your screen name should be the CSXT train identification followed by the lead unit's reporting marks.

Ex: Q144-BNSF4086

1. Please text message me with the following information when you enter the server. . .

CSX train identification-Lead unit (per above)
Length of train in feet (Let’s keep it to a max. of about
4500’-5000’ so that we can fit in sidings without too much
drama!)

2. It would be good, if time allows, for you to check out the starting points on the route, paths, consists, etc. before joining the session. Also get your radio problems sorted out by coming in around 9:15 p.m. EDT to do radio checks, etc. Be sure to turn off voice activation in the “settings” window of teamspeak. See above.

3. Download from the file library and use the “Guide to the CSX M&M Sub Route” by Chris Bogley. (mmguide.zip) This should help you quite a bit with locations, etc. Also download the signal and timetable files available at http://groups.yahoo.com/group/csx_mm/ for good information. You will need to join the group to do this.

4. Listen for a clear channel before beginning a radio communication.

5. Call signals as radio traffic allows. I must keep up with where you are. It’s ok in this situation to call it even a bit after you have passed it, if radio traffic does not allow you to call it immediately. Please use this format: “CSXT Q144-(lead unit sometimes and direction sometimes) got a clear signal south Georgiana (or milepost when not at a named controlled point/signaled siding). CSXT Q144 out.”

Often they will use the short format, with just the train ID, direction, signal name, and location, sometimes leaving off the 'T' in CSXT.

6. Try to determine what the correct signal indication would be when approaching a meet/pass point, and call it accordingly- “diverging approach medium”, “diverging approach”, etc. Of course what you will see will be “clears” since there is no actual traffic! Again see the signal data at http://groups.yahoo.com/group/csx_mm/ in the files section.

7. Let’s use channel two, dispatcher channel, for non-prototypical questions, problems, conversations, and for more lengthy prototypical communications concerning a particular train’s authority. Simply call the dispatcher and say, “Dispatcher, I’d like to go to channel 2, over.” I will move you in my window, or you may move yourself.

8. Let’s avoid random derailments, etc. If you have a problem, we will discuss it on channel 2. Be sure to save in the game with some frequency in order to recover if something happens.

9. Rather than saying, “I’ve got to quit now”, tell me you’re running short of time (Hours of Service) or "about to go on the law". We will find a spot for your train to be tied down. Again, go to channel two, if necessary.

10. Before the session, I may send a few private text messages to individuals who will be asked to announce the development of a problem of one sort or another at a specified location.

11. I will treat the route as CTC territory, which it is, and will simply give you directions as to what I will be doing with your train and with others from my console. Examples:

“I’ll let you go up to Nokomis, but I’m going to put you in the siding at Nokomis for the Q144. I should be moving you on after he gets by.” This means you will proceed by signal indication from where you are to Nokomis and into the siding. You should not move out of the siding and proceed beyond Nokomis until you hear from me again. Treat the signal as an absolute stop indication.

If I say “I’m going to hold you on the main at Nokomis”, then stay on the main, get in the clear between the switches, and do not pass the signal where the siding ends until told to do so.

12. Check back on this thread if something strange happens and we need to re-group.

13. I’d like to have an mow foreman on duty if possible, hint, hint. We’ll issue a track bulletin and set up work limits.

14. Let's work on keeping conversations on a prototy[ical level. Go to Channel 3 (Yard) for "chit-chat".

Tonight's Lineup (Check www.bullsheet.com for more info.):

PO01- Amtrak Sunset Limited Westbound (Start- "From Pensacola Sub South" To-"Mobile". Make stop at Atmore. Exit Brookley after making stop at Mobile platform.)

PO02- Amtrak Sunset Limited Eastbound (Start- "Brookley" To-"Flomaton" main two. Make stop at Atmore. Exit south leg of wye onto PD Sub.)

Q101- Jacksonville to New Orleans intermodal (Start- "From Pensacola Sub South" To-"Mobile". Exit Brookley.)

Q102- New Orleans to Jacksonville (Start- "Brookley" To- "Flomaton" main two. Exit south leg of wye onto PD Sub.)

Q144- New Orleans to Atlanta intermodal (Start- "North Nokomis" in siding To- "Montgomery". Take main two (right) at Catoma MP 492.7 and exit through Chester Yard onto A&WP Sub.)

Q193- Atlanta to New Orleans intermodal (Start- "Chester Yard" To-"Brookley". Exit onto NO&M Sub.) Make sure you get on the correct track leaving Chester Yard or you will wind up heading north. Please check it out before starting the session.

Q579- Birmingham to New Orleans merchandise (Start- "Elmore", S&NA South Sub. To- "Mobile". Exit onto NO&M Sub.)

Q600- Mobile to Atlanta merchandise (Start- "Sibert Yard" To-"Montgomery". Take main two (right) at Catoma MP 492.7 and exit through Chester Yard onto A&WP Sub.)

Q619- Hamlet, NC to Mobile manifest mixed freight (Start- "Georgiana" To- "Mobile") Yard train at Sibert Yard.

M729- Flomaton to Montgomery mixed freight (Start- "Pensacola Sub. North" To- Montgomery) Be sure to take switch onto north leg of wye in Flomaton. You may want to take a look before we start.

M703- Mobile to Atmore, Wawbeek, Bay Minette, and back to Mobile--Mobile Switcher (Start- “Sibert Yard” To- “Montgomery”)

M700- Montgomery to McGehees and Letohatchee-Montgomery mixed freight local. (Start- “Montgomery Yard” To- “Mobile”)

Again feel free to add others from www.bullsheet.com.

"CSX AG Out"

[kinnamon]

Be sure to post your trip tonight to the csxt m&m group so the seniority roster can be updated.

http://groups.yahoo.com/group/csx_mm/

Lee

[ssw]

Leader: BNSF 8208
Length:6686feet
Symbol: Q144-11
Callsign: Q144-11 BNSF 8208
Other Locomotives: CN5669, CSX 8119, CSX8252, CSX 7543
Tons: 8316

[BNSF4723]

Leader: Southern Pacific SD75i #9810
Length: 3231.69 feet
Symbol: CSX M729
Callsign: M729
Other locomotives: BNSF C44-9W #4723, Conrail C40-8 #6036
Tonnes: 3746.63

I hope I'm not underpowered... we'll see as we go along. BTW, I'm 53 mixed long as well.

[sou2601]

Q145 - (Su-Fr) Atl/Hulsey Ga to E. Bridge La

Lead Unit - CEFX 139
Callsign - Q145/Sou2601
Length - 3003ft
Tons - 3368

Lee- I would like to start a little further south if possible but I'm flexible.

Jonathan

[ssw]

I revised my train

cut out CSX 8252,8119
and some cars, down to 5400 feet.

[Darkviper01]

something has come up and I will be late tonight , but I will still take U-239 lead unit CSXT129 if I get home at a resonable time.

Paint Shop, Yonder Locomotive Works.
http://forums.flightsim.com/dcforum/User_files/403071b337c72e30.jpg
Check Out the WVK&O Homepage. http://www.angelfire.com/fang/dark_viper/page6.html
I'm Just down the road from NS/CSX Buckeye Yard.

[BlakeTyner]

Sorry I had to miss it tonight. Did y'all have fun? Everyone that has sent me an update so far has been duly noted in the roster.

:-)

[jdtrainman]

I'll delete this thread sometime Thursday evening. If we need to keep this thread open beyond that time let me know....

JBD