Rnglgdj Posted June 21, 2020 Share Posted June 21, 2020 Since i don't fly large planes I have not encountered this problem. I have been trying the C-17. The Stone one and the panel does not load the gauges for me at all . The copy for the 747 panel the #4 engine runs away. So does anyone have a soultion? Link to comment Share on other sites More sharing options...
surrodox2001 Posted June 21, 2020 Share Posted June 21, 2020 Do you have all of your gauges installed properly? If you have FS Panel Studio, there's an easy way to detect with opening the panel.cfg. That will tell you what gauges are you missing. Tip: Check out this post to see how are the gauges properly placed in the gauges folder. Link to comment Share on other sites More sharing options...
Rnglgdj Posted June 21, 2020 Author Share Posted June 21, 2020 Well the gauges for Stone C-17 are in a cab. I looked at it and the cfg calls them out but they do not load for me. Link to comment Share on other sites More sharing options...
tiger1962 Posted June 21, 2020 Share Posted June 21, 2020 There's no VC panel in the Mike Stone C-17, only a 2D panel, if that's what you mean by the gauges do not load for you. Tim Wright "The older I get, the better I was..." Xbox Series X, Asus Prime H510M-K, Intel Core i5-11400F 4.40GHz, 16Gb DDR4 3200, 2TB WD Black NVME SSD, 1TB Samsung SATA SSD NVidia RTX3060 Ti 8Gb, Logitech Flight Yoke System, CH Pro Pedals, Acer K272HL 27", Windows 11 Home x64 Link to comment Share on other sites More sharing options...
Rnglgdj Posted June 22, 2020 Author Share Posted June 22, 2020 I mean that the gauges in the cab do not load and you are looking at a panel with no gauges. So that is when I substituted the 747 panel so I would have a panel and the#4 engine ran away at least on the way I had it configured. Link to comment Share on other sites More sharing options...
GKKnupper Posted June 22, 2020 Share Posted June 22, 2020 you miss the xcab program in your windows installation. hope this helps. G.Kirschstein Link to comment Share on other sites More sharing options...
tiger1962 Posted June 22, 2020 Share Posted June 22, 2020 (edited) Are you using Mike Stone's original FS2004 base model, sc17.zip in the library here? There are a few updated models and panels for FSX in the library which may not work in FS2004. Edited June 22, 2020 by tiger1962 Tim Wright "The older I get, the better I was..." Xbox Series X, Asus Prime H510M-K, Intel Core i5-11400F 4.40GHz, 16Gb DDR4 3200, 2TB WD Black NVME SSD, 1TB Samsung SATA SSD NVidia RTX3060 Ti 8Gb, Logitech Flight Yoke System, CH Pro Pedals, Acer K272HL 27", Windows 11 Home x64 Link to comment Share on other sites More sharing options...
Rnglgdj Posted June 23, 2020 Author Share Posted June 23, 2020 I got the early c-17. What I am going to do is delete all the versions and going to put them on again from the delete folder one at a time and try one at a time. Getting the panel to load the gauges from the cab is one of the problems I really have. BTW thanks for the reply. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now