Jump to content

mjmiller

Registered Users
  • Posts

    84
  • Joined

Everything posted by mjmiller

  1. So removed the 737 max from the content folder, made no difference. Also emptied community folder no difference.
  2. Today I don't have live weather, checked my settings I'm online and live weather is turned on, but when I start the sim and load a flight, no live weather. Any ideas
  3. I recently made some changes in my settings in the sim after I made the changes I clicked on apply/save everything was good until I restarted the sim and all the settings had reverted back to the previous settings.
  4. Found the aircraft.cfg for the aircraft I was looking for, couldn't find anything referencing autopilot
  5. After some testing with different aircraft I found this problem occurs when I turn on the auto pilot and I notice the elevator is bouncing up and down wildly. I checked all my control assignments and don't have any conflicts. One other bit of info, I installed the 737 max from the market place, don't know if that could have changed something
  6. So when I fly any of my aircraft except the a320 the alt. Hold does not hold the aircraft, the vertical speed ignores what I have set and goes up wildly to 3,4,5000 vs. This is a new problem, the only thing I have changed is I turned on the rolling cache and set it to 16 when thistarted happening I turned it back off, no help
  7. Yes they retract from the cockpit, but won't from keyboard or joystick
  8. So I have the flaps deploying but can't get them to retract I couldn't find any conflicts I assigned it to the keyboard and joystick it doesn't retract the flaps the only way is to go into the cockpit
  9. I have a satek throttle, that's the only other device
  10. Ok so cleared the community folder, cleared keyboard and joystick assignments re assigned the flaps to the keyboard and joystick restarted computer and program with same result
  11. Today I took a flight in the Cessna longitude, everything worked fine until I went to land and the flaps wouldn't deploy, tried on joystick and in the cockpit, when I try to deploy them it comes down one notch and jumps right back to the home position. Tried it on different aircraft all the same. Restarted program and computer with same result.
  12. Found out why I couldn't find the rolling cache file in the folder, it was turned off in the sim settings. I turned it back on and went back to the folder and found it and deleted it. Restarted with same problem, what size should the rolling cache be set to
  13. Tim I appreciate the Info, I followed your path which was the same on mine, the local cache folder does not contain a rolling cache file.
  14. Cleared my community folder and restarted with the same result
  15. Everything has been working great until the last update. After the update when I startup the program and it goes to the first screen with the plane, then it goes to a black screen and remains that way for several minutes, sometimes it will continue to start and sometimes it will just sit there on the black screen and never starts up. Any ideas
  16. Is there a setting in the new sim that would be the same as the LOD RADIUS in the old sim?
  17. After the last update when I taxi to runway for takeoff rudder control is fine on all aircraft, when I land I cant control the rudder, it flips back and forth, doesnt matter what aircraft or airport. Any help would be appreciated.
  18. y first issue since the update is my longitude on ILS approach doesnt line up with the runway, it aquires the ILS descends to proper altitude but lines up to the side of the runway, instementation shows it needs to move over but it does not move over. #2 it doesnt matter what plane im flying or which airport im flying to I get clearance to land and about the time im going to touch downI get a go around, every airport and every plane. #3 On ILS approach when I get the go around the plane throttles up and wont respond to my throttle. Any help appreciated
  19. The first thing is the Cessna Longitude, When I fly a plan and get within 50 miles of the destination the electrical goes off with the autopilot off and you cant turn them back on. Next every fightI make does not matter what plane or destination I get clearance to land about the time im going to touchdown controler tells me to go around, any plane any airport. Lastly when I quit to desktop I get the message that MSFS has stopped working every time. Any help appreciated
  20. Today I went to fly the Cessna longitude, I found the flaps in the full down position and stuck there would not respond to any inputs from stick, or cockpit, tried the cj4 sam thing. Tried a320 it was fine. Any ideas?
  21. No Steve I mean how do you turn off managed speed. Used to just click on the dot next to the speed you set that would turn off managed speed
  22. I have been away from msfs for a few months, came back this week and did the updates, you used to be able to turn off the managed speed and altitude by just clicking on the dot on the auto pilot. Now they have a pop-up that I don't understand, could someone tell me how I can shut those off please.
  23. I hadnt flown the Longitude for awhile before the last update. A couple days ago I programed a flight to an airport with an ils approach, programed into the fms with correct freq. as I always have. At some point before I start the approach the ap shuts off and will not receive any input. I cant turn it back on, also the main screen gauge shows the green arrow but it never sees the ILS Freq. Seems to only be the Longitude?
  24. I got this message the other day, your packages are out of date, I looked for updates in content manager and microsot store and didn't see anything to update. Anybody seen this and what do you do
×
×
  • Create New...