Jump to content

aler

Registered Users
  • Posts

    68
  • Joined

Everything posted by aler

  1. I do not any problems especially the ones you describe. I would suggest to address your problems to their Discord site at: https://discord.gg/CfHuVbWfpQ
  2. It’s nothing wrong waits for the IRS. Check the IRS settings in the FMS-HEAVY.
  3. This freeware mod https://flightsim.to/file/23875/captain-sim-b777-salty-compatibility-mod-with-eicas-mod Makes CS a joy to fly. My .02 cents
  4. Running at 100% isn't a big deal but the temp is. You can create a profile in MSI afterburner by controlling the fan speed and you are good.
  5. Despite the negative comments, it works for me very good after installing Captain Sim B777 B767 - Salty Compatibility with EICAS Mod It can be downloaded for free from Flightsim.to My .02 cents
  6. I have problems with both BXH and Salty dev mods. I don’t think they are SU7 compatible yet.
  7. Here is the download link - dev version SU6 compatible. It works https://codeload.github.com/Heavy-Division/B78XH/zip/refs/heads/main Happy Flying
  8. Thank you guys, problem solved (missing panel directory ????) from the 787-10
  9. Everything was working fine after the SU5, and all of a sudden I got this. Any suggestions?
  10. …"…The best practice is to remove them all before an update, and afterward check each add-on developer's website/discord/fb/twitter for news of any patch or update release due……. ———————————————————————————— For an automatic dev updates I use https://flightsim.to/file/15569/msfs-community-downloader
  11. Sorry to disappoint you but my I7 and GTX1080TI are doing very well, no need to buy anything. NO changes to any of my 4K graphics specs just TURN OFF Photogrammetry for KORD only. This is my last response to you. Happy Landings
  12. There are a lot of people complaining about the same problem. I did not create the problem but finally I found a solution that was suggested as the initial intend was. What a crumpy response for “thanking you for your time”. Happy landings
  13. Yes, I run the GTX 1080TI with two 4K-42" TV monitors, along with a curved one and with an external CDU, with no problems in X-Plane. The only solution for FS2020 is to turn OFF the Phorgrammetry and I do not care as far as KORD. I haven't seen any other airports in US or abroad producing speed bumps upon my landing so far. So I rest my case with everything on ULTRA and Photogrammetry OFF for KORD. Thanks for your time.
  14. MSFS is running from the SSD and on a 42" 4k TV full screen see the graphics specs. I will check the memory speed.
  15. I have 1GB fiberoptic internet speed. I am still investigating the problem. My rig's specs are ASUS, Intel® Core™ i7-7700K, CPU 4.8GHz, GTX 1080Ti 11GB, 32GB RAM, 512GB SSD + 2TB HDD. I am an X Plane cockpit builder and I never had problems like these before :mad::mad:
  16. Probably I spoke too fast. Everything was OK yesterday but after today's update back to the same story:mad:
  17. Thank you. I think I found a solution. I will post my findings tomorrow. Smooth battery landings at KORD.
  18. I always fly with the UA Dreamliner livery. There are three files in my community folder, the UA livery, and to small files (code) they take care of the horizontal line and truncate the series of numbers after the decimal point when view the LEGS. The speed bumps appear with both stock Boeing landings too.
  19. With Photogrammetry OFF no speed bumps and very smooth landings. My rig's specs: ASUS, Intel® Core™ i7-7700K, CPU 4.8GHz, GTX 1080Ti 11GB, 32GB RAM, 512GB SSD + 2TB HDD.
  20. I tried to capture some pics but the bumps are at the beginning very pronounced and as the plane advances on the runway they progressively become smaller and disappear. The picture is not a good one but provides a rough idea. I found online that if Photogrammetry is OFF then there is no problem. I haven't tried yet but i will.
  21. Am I the only one? Why the bumps on every runway? Does anybody know how to get rid of them. I am flying only the Boeings in 4K- 42” inch TV with all to ULTRA.
×
×
  • Create New...